Tech Sheet:
Outboard TechniPlate® TC-W3

KL-332 quart; KL-333 gallon; 30 & 55 gallon drum

Description:

Klotz Outboard TechniPlate® is a pure synthetic lubricant with extremely high load carrying capacity for performance and racing outboards. Clean Burn™ No-Smoke technology eliminated carbon and residue build-up. Provides instant throttle response for increased horsepower. Meets and exceeds NMMA TC-W3, JASO FD and ISO-EGD specifications for certified warranty compliance. Klotz Outboard TechniPlate® will challenge and outrun the competition in the following ways:
  • TechniPlate® Peak Film Strength and Anti-Scuff protection
  • Provides instant throttle response for increased horsepower
  • High Load Carrying Capacity for reduced bearing and ring wear
  • Clean Burn™ technology eliminates carbon and residue build-up
  • Ashless, No-Smoke formula provides cleaner exhaust
  • Contains familiar Klotz Red for easy mixing and racy odor
  • Anti-Oxidation protection against rust and corrosion
  • Fast, easy starting

Application:

For use in all marine 2-stroke gasoline engines.

Characteristics:
Smoke Rating: 10 1 = fog - 10 = no smoke
Clean Burn™: 10 1 = heavy deposits - 10 = no carbon
Film Strength: 8 1 = failure - 10 = no wear
Pour Point: -36°F  
Flash Point: 275°F  
Maximum RPM: 10,500  
Viscosity @ 100°c: 7.40 cSt Typical  
Product Color: Red  

Instructions:

DIRECTIONS: Pre-mix or pour directly into oil injector. Mix at 40:1 to 50:1 ratio. For Hi-performance Mercury 2.5 Drag engines with 26cc heads run over 9500-9800 RPM mix at 40:1. Do not mix richer than 50:1 for any application under 9000 RPM to prevent over-lubricati
Compatibility: Blends with gasoline and stays in suspension. Will blend with petroleum oils and synthetic lubricants. 48% biodegradable formula.
Fuel Stability: Will dissolve in gasoline at ratios of 15:1 or greater.

Available part numbers: KL-332 quart; KL-333 gallon; 30 & 55 gallon drum